How To Set Up Rangextd Wifi Booster

RANGEXTD WiFi Rage Extender Pedagogy Manual

V.2

Introduction

RangeXTD is best used on Repeater Mode by extending your existing 802.11n wireless WiFi bespeak to black spots around your home or workplace. On Router Mode Information technology tin also exist used equally a WiFi router when wired to your modem or on AP Manner when wired to your existing wireless router. RangeXTD supports ii.4G wireless network connection, and information technology can back up 2.4G transmission speeds of up to 300Mbps. Information technology has 2X congenital-in antennas and provides first-class wireless performance, transmission rates and stability technology automatically avoids channel conflicts using its channel pick characteristic.

Parcel Contents

• 1 ten WiFi Extender/AP/Router (the device)
• 1 x Pedagogy Transmission
• 1 x RJ45 Cable

Hardware Overview

Default Setting
URL: 192.168.7.234
Login Password: admin
Wi-Fi SSID: RANGEXTD
WiFi Cardinal: None

WPS Button:

Press once to initiate WPS mode, printing and hold WPS button for vi seconds to activate WPS search style on your device (on Repeater Fashion).

Reset Pinhole Push button:

Press and agree 3 Seconds to reset the device.

LED Indicators

Ability/WPS	ON: The Device is power on OFF: The Device is not receiving electrical power Slow Flashing: The Device WPS waiting client connection Fast Flashing: The Device connecting to your AP/Router
LAN WAN/LAN	ON: The Ethernet port is connected OFF: The Ethernet port is disconnected Flashing: Data transferring

WiFi Signal Strength Indicators (refer to the diagram on the right)

Manner	one	2	3	Description
AP/Router	ON	ON	ON	Wi-Fi Signal output power 100%
Repeater	ON	ON	ON	Splendid reception point strength fifty% to 100%
	ON	ON	OFF	Good reception signal strength 25% to 50%
	ON	OFF	OFF	Weak reception betoken strength below 25%
	Flashing	OFF	OFF	Asunder

Getting Started

Setting up a Wireless Infrastructure Network

For a typical wireless setup at home (as shown below), please practice the following:

WIRELESS REPEATER MODE

The device copies and reinforces the existing wireless signal to extend the coverage of the signal. This way is especially useful for a large space to eliminate signal-blind spots. This manner is best for a large house, office, warehouse or other spaces where the existing point is weak.

WIRELESS AP MODE

The device is connected to a wired network so transforms the wired Internet access into wireless so that multiple devices can share the Internet. This mode is best used when there is intereference betwixt rooms like a basement. Extend wired connection from router to device in basement to proceeds wireless point to that area.

ROUTER Mode

The device is continued to a DSL or cable modem and works equally a regular wireless router. This manner is fit for an environs where Cyberspace admission from DSL or cable modem is available for one user just more users need to share the Net.

CONFIGURING THE WIFI REPEATER Mode

Configure via WPS Button

This is the easiest style to configure the device. First, check whether your wireless router supports WPS. For further details, please read the operating instructions for your wireless router. If your router does not have a WPS push, skip this page and follow the side by side page "Configure via Web Browser".

Tips: If you desire to keep the stable connexion between your router and RangeXTD on REPEATER manner, please install the device at a suitable position.

You lot can detect a suitable position by checking the signal indicator on the device, if the LED is below 2 levels, delight find new location.

STEPS

1. The fashion selector on the device must exist ready to the "Repeater" position for Repeater Way.
2. Plug the device into a wall socket. Plow on the device.
3. Press the WPS button for 1-two seconds on the device. The WPS LED volition slowly flashing for approx. ii minutes.
4. Within these ii minutes, please press the WPS button of your Wireless Router directly for 2-3 seconds. (For further details, please read the operating instructions for your wireless router.)

The device will then automatically connect to your wireless router and copy the wireless key settings. The device'south WiFi password will be the same as your AP/ Router. After you take finished rebooting, please go to your smart device (ie: phone, calculator, Goggle box, TV box, etc) WLAN setting to connect to the new SSID.

Configure via Web Browser (if no WPS button on router)

If your wireless router does not back up WPS, you lot can configure the WiFi Repeater Mode past connecting it with your smartphone/tablet/computer/laptop with enclosed RJ45 cable or wirelessly.

A. Configure the WiFi Repeater Mode wirelessly

A1. The way selector must be set to the "Repeater" position for Repeater Way. Plug the device into a wall socket. Turn device on.

A2. Click on the network icon ( or ) on the right lesser of your desktop. You lot volition find the signal called RANGEXTD. Click on `Connect' then wait for a few seconds.

A3. When connected, open your web browser and enter 192.168.seven.234 in the browser accost box. This number is the default IP accost for this device.

A4. The login screen below volition appear. Enter the default countersign "admin" and and then click 'Login'.

A5. After logging in, yous will see the web page beneath, click on the "Repeater" button to first setup.

A6. From the list, select a WiFi SSID. After having selected a WiFi SSID, you must then cardinal in the countersign of that wireless router. You can likewise give a new name for your RANGEXTD repeater.

When entered, click on the "Apply" push button to configure and reboot. After the reboot, please go to your device WLAN setting, connect to the new WiFi SSID.

B. Configure the Wi-Fi Repeater Mode with RJ45 Cable.

B1. Plug the Device into a wall socket. Plough on device. Connect your reckoner / laptop with the Device with RJ45 Cable.

B2. Follow process A3 to A6 to configure the Device.

Resetting RANGEXTD

To restore factory default settings, press and hold the RESET pinhole push for 10 seconds and so release, the indicators volition all turn off. Afterwards you reset your device, unplug the it for 3 seconds. Plug it dorsum in and wait about 30 seconds, and then check your WiFi network for the network called 'RANGEXTD' on your reckoner or mobile device.

*If your device is already configured to your network, y'all cannot access the default IP address (192.168.7.234). You must reset the device to access again.

Scan the below QR code for video instructions.

CONFIGURING THE WIFI AP MODE

Employ the AP Manner to obtain a "wireless admission point". The wireless cease devices volition connect to the RANGEXTD in this mode. You can too utilize this fashion, for instance, to make a formerly non-wireless-enabled router wireless-enabled.

STEPS

1. The mode selector must be set to the "AP" position for Access Point Mode.
2. Plug the device into a wall socket. Turn on device. Connect your router with the Device with RJ45 cable.
3. When connected, open your spider web browser and enter 192.168.7.234 in the browser address box.
4. This number is the default IP accost for this device. The login screen beneath will announced. Enter the default password "admin" and then click "Login".
   
5. After logging in, you will see the web page below, click on the "AP" button to kickoff setup.
   
6. The following message volition be displayed on your web browser: Enter the device wireless parameter. Information technology'due south recommended that yous rename an SSID, choose an Hallmark Fashion and create a WiFi Password.
   

SSID	Create the wireless SSID/Proper noun of the device
Hallmark Mode	Setup the wireless security and encryption to prevent unauthorized access and monitoring. Supports WPA, WPA2, WPA/WPA2 encryption methods.
Password	Create a countersign for the device

Click on "Utilise" button, the device will restart.

Later on the reboot has been completed, please use your smart device's (smartphone/tablet/computer/laptop etc) WLAN setting to connect to new WiFi SSID that you created.

Resetting RANGEXTD

To restore mill default settings, press and concord the RESET pinhole button for 10 seconds and then release, the indicators will all turn off. Afterwards you reset your device, unplug the information technology for 3 seconds. Plug information technology back in and look about xxx seconds, and then check your WiFi network for the network called 'RANGEXTD' on your computer or mobile device.

*If your device is already configured to your network, you cannot access the default IP address (192.168.7.234). You must reset the device to access again.

Scan the below QR lawmaking for video instructions.

CONFIGURING THE WIFI ROUTER MODE

The device is connected to a DSL or cable modem and works as a regular wireless router. Internet access from DSL or cable modem is available for i user but more than users need to share the Internet.

STEPS

1. The fashion selector must be prepare to the "Router" position for Router Style.
2. Plug the Device into a wall socket.
3. Connect your DSL Modem with the Device with RJ45 Cable.
4. When connected, open up your spider web browser and type 192.168.seven.234 in the browser accost box. This number is the default IP address for this device.
5. The login screen below will appear. Enter the default password "admin" and then click 'Login'.
   
6. Afterward logging in, you will run across the web page below, click on the "Router" button to showtime setup.
   
   Choose your WAN Connection Blazon.
   
7. Enter the device wireless parameter. Information technology'south recommended that y'all rename an SSID, cull an Authentication Way and create a WiFi Password. Click "Apply" button, it will restart. Expect for a few seconds the Device is ready for use.
   

   SSID	Create the wireless SSID/Proper noun of the device
   Hallmark Mode	Setup the wireless security and encryption to prevent unauthorized access and monitoring. Supports WPA, WPA2, WPA/WPA2 encryption methods.
   Password	Create a password for the device

   7*. Cull your WAN connection blazon.
   If PPPoE (ADSL Dial-up) is selected, please enter the Account and Password from your Isp, these fields are case-sensitive.
   

8. * If Static IP is selected, please enter the IP Accost, Subnet Mask, Default Gateway, DNS, etc.
   
9. * Enter the device wireless parameter. It'south recommended that y'all rename an SSID, cull an Authentication Way and create a WiFi Password. Click "Employ" push, it volition restart. Wait for a few seconds the Device is fix for use.
   

   SSID	Create the wireless SSID/Proper noun of the device
   Authentication Mode	Setup the wireless security and encryption to prevent unauthorized access and monitoring. Supports WPA, WPA2, WPA/WPA2 encryption methods.
   Countersign	Create a password for the device

Click on "Utilize" button, the device volition restart.

After the reboot has been completed, delight employ your smart device's (smartphone/tablet/computer/laptop etc) WLAN setting to connect to new WiFi SSID that y'all created.

Resetting RANGEXTD

To restore factory default settings, press and concur the RESET pinhole button for 10 seconds and and so release, the indicators volition all turn off. After you reset your device, unplug the it for 3 seconds. Plug it back in and await nigh xxx seconds, and then check your WiFi network for the network called "RANGEXTD" on your figurer or mobile device.

*If your device is already configured to your network, y'all cannot access the default IP address (192.168.7.234). You must reset the device to admission over again.

Browse the beneath QR code for video instructions.

Change Management Password

Default password of the device is "admin", and it'southward displayed on the login prompt when accessed from web browser. There's a security adventure if you don't alter the default password, since everyone can see it. This is very of import when y'all take the wireless function enabled.

To change password, delight follow the following instructions: Please click "Password" button on the direction setting interface, the following message will be displayed on your web browser:

Click "Apply" button, the Device volition log off.

If you forgot your existing password, y'all tin can reset the password past clicking the reset pinhole push button on the side of the device for x seconds and then release, the indicators volition all plow off. After you reset your device, unplug the information technology for 3 seconds. Plug it back in and wait well-nigh 30 seconds, then check your WiFi network for the network called 'RANGEXTD' on your computer or mobile device.

Firmware Upgrade

The organization software used past this router is called "Firmware", just like any applications on your computer, when you replace the former application with a new ane, your figurer will be equipped with new functions. You can likewise use this firmware upgrade part to add new functions to your router, even fix the bugs of this router.

Delight click "Upgrade Firmware" located at the management setting interface, and so the post-obit message will exist displayed on your web browser:

Click "Browse…" or "Choose File" push first; yous'll be prompted to provide the filename of firmware upgrade file. Please download the latest firmware file from our website, and use information technology to upgrade your router.

After a firmware upgrade file is selected, click "Upload" button, and the device volition first firmware upgrade procedure automatically.

The procedure may take several minutes, please exist patient.

Note:

• Never interrupt the upgrade procedure by closing the web browser or physically disconnect your figurer from the device. If the firmware y'all uploaded is interrupted, the firmware upgrade volition fail, contact customer support for assist if needed.
• Warranty is void if y'all interrupted the upgrade procedure.

How to Connect your Reckoner/Laptop with the Device

Adding a wireless computer to the device

1. Log on to the estimator.
2. Connect to a network by correct-clicking the network icon ( or ) in the notification area.
3. Choose the wireless network from the list that appears, and then click Connect.
4. Type the network security key or passphrase if yous are asked to exercise and so, then click OK.
   Y'all'll see a confirmation bulletin when you are connected to the network.
5. To confirm that you added the figurer, please practise the following: Open network past clicking the Showtime button , and so clicking Control Panel. In the search box, type network, and then, under Network and Sharing Centre, click View network computers and devices. You should encounter icons for the figurer you added and for the other computers and devices that are part of the network.

Note:

If you don't run across icons in the Network folder, so network discovery and file sharing might be turned off.

Scan the below QR code for MAC set upward

Difficulties with setting upwards your Device?

Nosotros are here to assistance!

Please visit https://support.myrangextd.com/ or scan the QR lawmaking for any urgent inquiries!

WEEE Directive & Product Disposal

At the cease of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection indicate for the recycling of electric and electronic equipment, or returned to the supplier for disposal.

FCCID NO: 2AVK9-30251

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following 2 conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user'southward authorisation to operate the equipment.

NOTE: This equipment has been tested and constitute to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection confronting harmful interference in a residential installation. This equipment generates uses and tin can radiate radio frequency energy and, if non installed and used in accordance with the instructions, may cause harmful interference to radio communications. Nonetheless, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined past turning the equipment off and on, the user is encouraged to try to correct the interference by one or more than of the following measures:

• Reorient or relocate the receiving antenna.
• Increment the separation betwixt the equipment and receiver.
• Connect the equipment into an outlet on a excursion different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiations Exposure Statement

This equipment complies with FCC radiations exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum altitude 20cm between the radiator and your torso.

Canada EMC statement

This device complies with RSS 210 of the Manufacture Canada Rules. Operation is subject to the following two conditions: (1) this device may not crusade interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This Form [B] digital apparatus complies with Canadian ICES-003.

This equipment complies with Canada radiation exposure limits prepare forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm （may be adjusted according to actual adding result） betwixt the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Documents / Resources

References

• RangeXTD

Source: https://manuals.plus/rangextd/wifi-range-extender-manual

Share this post